shielded contacts b-10 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/102 852-004 size 12 coaxial pin size #12 coaxial pin contacts for mil-dtl-38999 series i, ii, iii and iv connectors type cable accommodation part number military part number color band 1st 2nd 3rd pin m17/113-rg316 m17/094-rg179 852-004-12-558 m39029/102-558 green green gray d38999 ser. i, ii, iii, iv ? f ? g h shield crimp sleeve s min n m ? u ? k min inner socket contact designed to meet engagement/ separation force requirements thru one wall only radial location optional .022 .013 ? ? a ? v ? d ? z ? b ? e max after crimp .570 max outer contact inner socket contact outer contact shield crimp sleeve ? c .067 min .300 .295 .248 min .033 .029 r .003 max .162 min depth bin color band (see table) * 32 these contacts ofer improved frequency response compared to standard coaxial contacts. vswr is 1.32:1 at 3ghz . nominal impedance is 50 ohms. insertion loss at 3ghz is 0.20 db maximum. inner contact is rated at 1 amp, the outer contact 12 amps. dwv voltage rating is 1000 vac rms sea level, 250 vac at 50,000 feet. contacts are packaged individually and shipped unassembled with instruction sheet. inner and outer contacts are gold-plated copper alloy. 5000 megohm insulation resistance.
shielded contacts b-11 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/102 852-004 size 12 coaxial pin material and finish contact body: copper alloy/gold plated hood: stainless steel/passivated center contact: copper alloy/gold plated crimp sleeve: copper alloy/gold plated insulator: tefon * i ndicates point at which a square ended pin of the same basic diameter as the mating contact frst engages the outer contact spring table i bin code ?a ? b min ?c ?d ? e max ? f min ?g max 558 .095 (2.41) .093 (2.39) .066 (1.7) .151 (3.84) .148 (3.76) .182 (4.62) .179 (4.55) .156 (4.0) .127 (3.2) .169 (4.3) table i (continued) bin code h ? k min m n s min u ?v ? z max 558 .180 (4.6) .170 (4.3) .022 (.6) .088 (2.2) .063 (1.6) .100 (2.5) .084 (2.1) .135 (3.4) .035 (.9) .031 (.8) .027 (.7) .025 (.6) .110 (2.8) table iii inner contact outer contact insertion tool extraction tool basic crimping tool positioner basic crimping tool die daniels mh992 glenair 859-006 or k1721 m22520/5-01 m22520/5-03 m81969/8-09 or m81969/14-04 m81969/8-10 or m81969/14-04
|
